Usually, the bridge and the video disk are connected to the switch at the same time. The video disk does not show the lens. The bridge may not be paired or the bridge is not in the same network segment as the video disk.

1. Check whether the wireless bridge has been successfully paired. It can be judged by the indicator light of the bridge. If the indicator light is always on, it is successfully paired. At the same time, enter the management page of the bridge. Open the status to view the peer device Mac, and the pairing is successful. The MAC of the peer device can be displayed. If the data is empty, the pairing is successful, and the bridge reset can be re-paired.

2. After determining that the bridge has been successfully paired, check whether the IP address of the bridge and the video disk is on the same network segment. If it is not on the same network segment, modify it to the same network segment.